Quality CR-3500 Multi-knife depaneling machine Manufacturer | CJR

Features:

1) The machine has applied for a patent, the patent number is ZL 2014 3 0290493.8, ZL 2014 2 0461476.0, dual patent products;

2) The domestic exclusive use of the principle of double sets of multiple knives to cut the PCB board at one time completely solves the traditional so-called "multi-knife splitter", which is actually the bottleneck of low single-cutting efficiency.

3) The upper and lower tool shafts are designed as a whole, which is convenient and quick to install, pick and place;

4) Any PCB board (substrate) with V-CUT can be applied to this machine;

5) It is divided by machine to reduce stress and prevent cracking of solder joints.

6) When dividing the board, use multiple sets of knives to cut the PCB board, which can cut 14 pieces (with edges) and below at one time; and more than 14 pieces can also be customized;

7) The cutter wheel on the machine can be fine-tuned as a whole: 0-5mm;

8) The distance between the knife and the knife can be adjusted, which is suitable for cutting a single PCB board with a width of 20mm and above;

9) The blade adopts imported SKH51 high-speed steel, which has long life and wear resistance;

10) The cutting speed can be set and adjusted easily by twisting;

11) There is no limit to the stroke of the sub-board;

12) PC board segmentation thickness: 0.8-3.0mm;

13) The attached conveyor belt line can be installed to transfer the separated PCB boards directly to facilitate the operation, and can be directly connected with the flowing water to reduce pick and place;

14) This machine is acceptable for the division of LED control boards, fiberboards, aluminum substrates (long boards over 400mm) and special boards.

15) This machine adopts multi-knife plate separation, which is easy to operate and has high efficiency, which is suitable for mass production.

parameter:

Power: 110V/220V AC 60HZ/50HZ

Size:L1500 x W700 x H1100 mm

Weight: 100kgs

About CJR